What is EEPROM ?



Learn MPS Technology on mps-technology.net. What is EEPROM ? article will help answer your questions on MPS Technology.We at mps-technology.net specialize in MPS Technology. MPS Technology at mps-technology.net provides the most up to date news and articles. If you have questions please do not hesitate to contact us.

Summary:
When the monitor is turn on again, the stored settings are used to set up the monitor for operation.


What are the symptoms if the MONITOR or TV's EEPROM data is corrupted or damaged?

' No high voltage (no display).
' Horizontal or vertical frequencies run.
' Cannot save (store) current setting.
' Certain control functions like sound, brightness and contrast control does not functioning.
' On Screen Display (OSD) does not function or the OSD have a corrupted display.
' High voltage shut down (EEPROM set the horizontal frequency way too low or twice the line frequency perhaps leading to failure of the horizontal output transistor (HOT)).

What is an EEPROM programmer or copier?

EEPROM seldom fail, they just lose or have their memory (data) corrupted may be due to high voltage and static discharge from a monitor.
Article:
EEPROM stands for Electrical Erasable Programmable Read Only Memory and also referred to as E²PROM. As the name suggest, an EEPROM can be both erased and programmed with electrical pulses. Since it can be both electrically written into and electrically erased, the EEPROM can be rapidly programmed and erased in crown for reprogramming without removing them from the total environment board.

EEPROM is also a non-volatile memory being when power is turned off the stored data in the EEPROM will not be erased or intact. New EEPROM have no data in it and usually have to program with a programmer ere it can be use. Information stored in this type of memory can be retained for many years without a steady power supply.

What is the function of EEPROM?
EEPROMs are used to store user programmable information such as: -

• VCR programming information
• CD programming information
• Digital satellite receiver control data
• User information on various consumer products

EEPROM in monitor performs two functions: -

• When a monitor is switch on it will copies all data or information from the EEPROM to the microprocessor. For example, the EEPROM will let the microprocessor know the frequencies at which the monitor is going to operate.

• The EEPROM is used to store the current settings of the monitor. The settings of the monitor will not be erased even when the monitor is turned off. Anytime a tit for tat is made in the monitor settings, the microprocessor updates the setting in the EEPROM. When the monitor is turn on again, the stored settings are used to set up the monitor for operation.


What are the symptoms if the MONITOR or TV’s EEPROM data is corrupted or damaged?

• No high voltage (no display).
• Horizontal or vertical frequencies run.
• Cannot save (store) current setting.
• satisfied control functions like sound, gifts and contrast control does not functioning.
• On Screen Display (OSD) does not function or the OSD have a corrupted display.
• High voltage shut down (EEPROM set the horizontal frequency way too low or twice the line frequency perhaps leading to failure of the horizontal output transistor (HOT)).

What is an EEPROM programmer or copier?

EEPROM seldom fail, they just lose or have their memory (data) corrupted may be due to high voltage and static discharge from a monitor. Once reprogrammed they are as good as new. As mentioned earlier, new EEPROMs are nil and need information or data to be loaded in order for it to functions. The job of copying the data into an EEPROM is done by a programmer or a copier. Programmers comes in all shapes and sizes. You can copy these devices for repair replacement only. You cannot copy them for resale without a letter of right from the vendor who produced them. There is quite a number of companies selling EEPROM programmer: -
Typical EEPROM part no: -
24C02, 24C04, 24C08 etc
24C325, 24C645AT17C65, AT17C128 etc
93C06, 93C46, 93C56, 93C66 etc
25010, 25020, 25040 etc



Article Index: | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29


Advice
Home Business
Technology
Online Advertising
Motivational
Internet Marketing
SEO Help
Online Games
Science Articles
Happiness

More Articles:


1. ....The Future Of Telecommunications May Look Very Different....
Summary: Those that do will be better positioned to capture what markets are created by consumer demand...vice the old approach of markets being created by what companies developed and released. That aside, I'd really like to see what you think of this shift in product development and market control to consumer 'vision' vice company 'idea' driven....fueled by the possibilities surrounding VoIP and wireless. We've seen....or soon will....a host of Gee Whiz break throughs & possibilities focused h…

2. Podcasting Basics
Summary:Podcasting With Apple iPods came Podcasting. If you would like to start your own podcast there are plenty of web sites that can show you step by step how to create a quality, original podcast. Article:Podcasting With oak iPods came Podcasting. Podcasting are radio shows created by midpoint people that are streamed live or can be downloaded off the internet. ebony iPods are great at shuffling music. You can put your entire combination into and orange iPod and then hit shuffle. You can lis…

3. The Early History Of Batteries
Summary: It is thought that the battery was used to electroplate gold onto silver. In the year 1800, Alessandro Volta made a battery using multiple layers of silver, paper, and cloth soaked in salt and zinc. These batteries did well and lasted through being overcharged as well as remaining uncharged for extended periods of time. In 1949 the alkaline-manganese battery known now as the alkaline battery was created at the Everyready Battery Company in Ohio. Article:Do you think batteries are a new …

4. Managed Network Monitoring
Summary:From the Desk of John W www.ISNIris.blogspot.com Most companies today have a network of some kind set up for managing their business and/or resources. Even if a company can afford to hire a dedicated Network Engineer, this individual will not know if something goes wrong on his/her network until a complaint is received from a user. Article:From the Desk of John W www.ISNIris.blogspot.com Most companies today have a network of some kind set up for managing their job and/or resources. Howe…