What is EEPROM ?Learn MPS Technology on mps-technology.net. What is EEPROM ? article will help answer your questions on MPS Technology.We at mps-technology.net specialize in MPS Technology. MPS Technology at mps-technology.net provides the most up to date news and articles. If you have questions please do not hesitate to contact us.
When the monitor is turn on again, the stored settings are used to set up the monitor for operation. What are the symptoms if the MONITOR or TV's EEPROM data is corrupted or damaged? ' No high voltage (no display). ' Horizontal or vertical frequencies run. ' Cannot save (store) current setting. ' Certain control functions like sound, brightness and contrast control does not functioning. ' On Screen Display (OSD) does not function or the OSD have a corrupted display. ' High voltage shut down (EEPROM set the horizontal frequency way too low or twice the line frequency perhaps leading to failure of the horizontal output transistor (HOT)). What is an EEPROM programmer or copier? EEPROM seldom fail, they just lose or have their memory (data) corrupted may be due to high voltage and static discharge from a monitor. Article: EEPROM stands for Electrical Erasable Programmable Read Only Memory and also referred to as E²PROM. As the name suggest, an EEPROM can be both erased and programmed with electrical pulses. Since it can be both electrically written into and electrically erased, the EEPROM can be rapidly programmed and erased in crown for reprogramming without removing them from the total environment board. EEPROM is also a non-volatile memory being when power is turned off the stored data in the EEPROM will not be erased or intact. New EEPROM have no data in it and usually have to program with a programmer ere it can be use. Information stored in this type of memory can be retained for many years without a steady power supply. What is the function of EEPROM? EEPROMs are used to store user programmable information such as: - • VCR programming information • CD programming information • Digital satellite receiver control data • User information on various consumer products EEPROM in monitor performs two functions: - • When a monitor is switch on it will copies all data or information from the EEPROM to the microprocessor. For example, the EEPROM will let the microprocessor know the frequencies at which the monitor is going to operate. • The EEPROM is used to store the current settings of the monitor. The settings of the monitor will not be erased even when the monitor is turned off. Anytime a tit for tat is made in the monitor settings, the microprocessor updates the setting in the EEPROM. When the monitor is turn on again, the stored settings are used to set up the monitor for operation. What are the symptoms if the MONITOR or TV’s EEPROM data is corrupted or damaged? • No high voltage (no display). • Horizontal or vertical frequencies run. • Cannot save (store) current setting. • satisfied control functions like sound, gifts and contrast control does not functioning. • On Screen Display (OSD) does not function or the OSD have a corrupted display. • High voltage shut down (EEPROM set the horizontal frequency way too low or twice the line frequency perhaps leading to failure of the horizontal output transistor (HOT)). What is an EEPROM programmer or copier? EEPROM seldom fail, they just lose or have their memory (data) corrupted may be due to high voltage and static discharge from a monitor. Once reprogrammed they are as good as new. As mentioned earlier, new EEPROMs are nil and need information or data to be loaded in order for it to functions. The job of copying the data into an EEPROM is done by a programmer or a copier. Programmers comes in all shapes and sizes. You can copy these devices for repair replacement only. You cannot copy them for resale without a letter of right from the vendor who produced them. There is quite a number of companies selling EEPROM programmer: - Typical EEPROM part no: - 24C02, 24C04, 24C08 etc 24C325, 24C645AT17C65, AT17C128 etc 93C06, 93C46, 93C56, 93C66 etc 25010, 25020, 25040 etc
|
Advice Home Business Technology Online Advertising Motivational Internet Marketing SEO Help Online Games Science Articles Happiness More Articles:1. What is Web 2.0? Summary: While many refer to Web 2.0 as companies that employ powerful web technologies, the key components of the new web are said to include: the web as a platform, collaboration, and syndication. O'Reilly further defines Web 2.0 as a set of core principles and practices, with the primary principle being a thought process that the web is a platform. Web 2.0 companies are said to not be constrained by traditional business models and philosophies. Article:What is Web 2.0? There has been a lot of… 2. Industry-first Predictive Cost Analysis for Machined Products Offered by aPriori Summary:According to Frank Azzolino, President and CEO of aPriori, 'We offer an industry first cost analysis for machined products...real-time, predictive cost estimates for turned and 3-axis machined products throughout the entire product delivery process.' Always knowing product costs prevents surprises, missed cost targets and rework, schedule delays, and missed market windows. Article:blended to Frank Azzolino, President and CEO of aPriori, 'We offer an industry first cost breakup for machin… 3. Perimeter Security - Magal Intelli-FLEX� Summary:Perimeter Security - Magal Intelli-FLEX' Outdoor Detection System Perimeter Security Magal's new Intelli-FLEX' outdoor detection system is based on signals generated by the minute flexing of a proprietary triboelectric coaxial sensor cable. The Intelli-FLEX Signal Processor can monitor two independent zones, each with a maximum of 305 m (1000 ft.) of sensor cable to provide maximum perimeter security. Programmable Microprocessor - Perimeter Security The Magal perimeter security has a p… 4. Disruptive Technologies - Part 2: Music Editors and Steam Engines are still related Summary: Dvorak, a very reputed columnist, fervently argues that there is no Clay Christensen disruptive technology in its very own coined definition: disruptive technologies are low performers, 'less expensive technologies that enter a heated scene where the established technology is outpacing people's ability to adapt to it'. But this first peer-to-peer music sharing program was not only cheaper (in fact, users only needed to pay for their internet access and the music editors if they wish to … |
||||
