What is EEPROM ?Learn MPS Technology on mps-technology.net. What is EEPROM ? article will help answer your questions on MPS Technology.We at mps-technology.net specialize in MPS Technology. MPS Technology at mps-technology.net provides the most up to date news and articles. If you have questions please do not hesitate to contact us.
When the monitor is turn on again, the stored settings are used to set up the monitor for operation. What are the symptoms if the MONITOR or TV's EEPROM data is corrupted or damaged? ' No high voltage (no display). ' Horizontal or vertical frequencies run. ' Cannot save (store) current setting. ' Certain control functions like sound, brightness and contrast control does not functioning. ' On Screen Display (OSD) does not function or the OSD have a corrupted display. ' High voltage shut down (EEPROM set the horizontal frequency way too low or twice the line frequency perhaps leading to failure of the horizontal output transistor (HOT)). What is an EEPROM programmer or copier? EEPROM seldom fail, they just lose or have their memory (data) corrupted may be due to high voltage and static discharge from a monitor. Article: EEPROM stands for Electrical Erasable Programmable Read Only Memory and also referred to as E²PROM. As the name suggest, an EEPROM can be both erased and programmed with electrical pulses. Since it can be both electrically written into and electrically erased, the EEPROM can be rapidly programmed and erased in crown for reprogramming without removing them from the total environment board. EEPROM is also a non-volatile memory being when power is turned off the stored data in the EEPROM will not be erased or intact. New EEPROM have no data in it and usually have to program with a programmer ere it can be use. Information stored in this type of memory can be retained for many years without a steady power supply. What is the function of EEPROM? EEPROMs are used to store user programmable information such as: - VCR programming information CD programming information Digital satellite receiver control data User information on various consumer products EEPROM in monitor performs two functions: - When a monitor is switch on it will copies all data or information from the EEPROM to the microprocessor. For example, the EEPROM will let the microprocessor know the frequencies at which the monitor is going to operate. The EEPROM is used to store the current settings of the monitor. The settings of the monitor will not be erased even when the monitor is turned off. Anytime a tit for tat is made in the monitor settings, the microprocessor updates the setting in the EEPROM. When the monitor is turn on again, the stored settings are used to set up the monitor for operation. What are the symptoms if the MONITOR or TVs EEPROM data is corrupted or damaged? No high voltage (no display). Horizontal or vertical frequencies run. Cannot save (store) current setting. satisfied control functions like sound, gifts and contrast control does not functioning. On Screen Display (OSD) does not function or the OSD have a corrupted display. High voltage shut down (EEPROM set the horizontal frequency way too low or twice the line frequency perhaps leading to failure of the horizontal output transistor (HOT)). What is an EEPROM programmer or copier? EEPROM seldom fail, they just lose or have their memory (data) corrupted may be due to high voltage and static discharge from a monitor. Once reprogrammed they are as good as new. As mentioned earlier, new EEPROMs are nil and need information or data to be loaded in order for it to functions. The job of copying the data into an EEPROM is done by a programmer or a copier. Programmers comes in all shapes and sizes. You can copy these devices for repair replacement only. You cannot copy them for resale without a letter of right from the vendor who produced them. There is quite a number of companies selling EEPROM programmer: - Typical EEPROM part no: - 24C02, 24C04, 24C08 etc 24C325, 24C645AT17C65, AT17C128 etc 93C06, 93C46, 93C56, 93C66 etc 25010, 25020, 25040 etc
|
Advice Home Business Technology Online Advertising Motivational Internet Marketing SEO Help Online Games Science Articles Happiness More Articles:1. RFID for Beginners Summary:RFID technology is used frequently today and has been around since the 1920s, but not many people know about, or understand it. The tags have antennas that allow them to receive and respond to radio-frequency queries from an RFID transceiver.Two Types of RFID TagsThere are two types of RFID tags; RFID is generally used in security, because security gates are programmed to read the RFID tags and then either open or close accordingly. The hope is that RFID will one day be available to ever… 2. Technology and Coping with Disaster Summary: The same technologies that allow us to view the aftermath of a tsunami also allow us to quickly gather factual data on the extent of a disaster, and use that for disaster planning and response. Organizations such as the Pacific Disaster Center (http://www.pdc.org/), the Asia Pacific Area Network (http://www.apan-info.net/), try to assist regional nations to build better disaster planning models and response model through training and timely dissemination of critical information. Regiona… 3. What is Software Piracy? Summary: Effects of Software PiracyWhen software is pirated, consumers, software developers, and resellers are harmed. When software is pirated, software developers lose revenue from the sale of their products, which hinders development of new software and stifles the growth of the software company.Kinds of PiracyEnd User Piracy - Using multiple copies of a single software package on several different systems or distributing registered or licensed copies of software to others. For the software i… 4. ERP Software Enterprise 21 by Technology Group International Turns Government Regulations into ERP Marketing Opportunities Summary: According to Cutler's article, the Public Health Security and Bioterrorism Preparedness and Response Act of 2002 (the Bioterrorism Act) directs the Secretary of Health and Human Services to issue final regulations that establish requirements regarding the establishment and maintenance, for not longer than two years, of records by persons (excluding farms, restaurants and certain others) who manufacture, process, pack, transport, distribute, receive, hold, or import food. The product off… |
||||
